Two room communication outdoor cabinet Fiber Optic Distribution Box
Field Assemble Rack Room
Outdoor cabinets refer to cabinets that are directly under the
influence of natural climate and are made of metal or non-metallic
materials. Unauthorized operators are not allowed to enter and
operate. It provides an outdoor physical working environment and
safety system for wireless communication sites or wired network
site workstations. device of. It is suitable for cabinets installed
in outdoor environments, such as roadsides, parks, roofs,
mountainous areas, and flat grounds. Base station equipment, power
equipment, batteries, temperature control equipment, transmission
equipment and other supporting equipment can be installed in the
cabinets or reserved for installation of the above equipment The
space and heat exchange capacity can provide reliable machinery and
environmental protection cabinets for the normal operation of
1. Use hot-dip galvanized sheets with a thickness greater than or
equal to 1.5mm for the panels used to manufacture the exterior of
the cabinet body. After the hot-dip galvanized sheets are welded,
they must be sprayed with outdoor powder. The cabinet with
heat-dissipating temperature control device adopts hot-dip
galvanized sheet as the plate, and the cabinet with refrigerating
temperature control device adopts hot-dip galvanized sheet greater
than or equal to 1.5mm plus 10mm insulation cotton as the plate.
The base of the cabinet is made of cold-rolled steel plate with a
thickness of not less than 2mm, and the surface is treated with
hot-dip galvanizing after welding.
2. The metal materials used in the cabinet should have the ability
to resist corrosion and electrochemical reactions after or without
3. Non-metallic parts (including insulated wires, cables and foam
materials) should be flame-retardant materials, and their
flammability should be able to pass the flame-retardant test
●The product is durable, anti-corrosion, and has a service life of
●Flexible and diverse product configuration
●Integrated temperature control system (fan, heat exchanger or air
●High protection grade, protection grade reaches IP55.
●Noise reduction processing.
●Using electrophoresis plus special outdoor powder to enhance
outdoor corrosion resistance and UV resistance.
●The main equipment, temperature equipment and wiring modules in
the cabinet are designed to be divided into compartments, which is
convenient for future graded maintenance.
●Anti-theft design, high anti-damage coefficient.
●Integrated electrical wiring and AC/DC power distribution system.
The coating surface should be continuous and uniform, and the
texture should be consistent with the corresponding standard
template, and there should be no nodules, shrinkage, blistering,
pinholes, cracks, peeling, chalking, particles, sagging, bottoming,
inclusions and other defects .
For cabinets without spray treatment, the gloss and texture of the
outer surface should be uniform and beautiful.
After the adhesion test, the coating on the surface of the cabinet
meets the requirements of level 1 in Table 1 of GB/T 9286-1998.
After the impact resistance test, the coating on the surface of the
cabinet has no defects such as radial cracks and nicks.
The coating on the surface of the cabinet is anti-aging.
After the coating on the surface of the cabinet has been tested for
solvent resistance, the surface should be visually inspected and
there should be no signs of loss of gloss, obvious discoloration,
or being wiped.
Composition of outdoor integrated cabinet:
Equipment warehouse: The equipment warehouse is distributed on the
right side of the cabinet, and is separated from the battery
warehouse with a partition to facilitate the insulation of the
Storage battery: used to install storage battery, the outer plate
of the cabinet is pasted with insulation cotton to achieve the
thermal insulation effect. The battery cabinet is also equipped
with a sunshade to achieve the effect of sun protection and
waterproofing. The cabinet is equipped with an exhaust device,
which can release the hazardous gas produced by the battery.
Door and door lock: The cabinet door adopts built-in structure, and
the gap between the door is tight. The door opening angle is
>110°, the cabinet door has a limit structure, and the door
limit device has a limit function when the door is in the "open"
state. The door lock adopts a three-point structure with a pull rod
and a locking piece, and a padlock can be added. Firm structure,
strong anti-theft. Each cabinet door is equipped with a door open
alarm sensor to cooperate with environmental monitoring.
Technical parameters of outdoor integrated cabinet:
1. The cabinet has the characteristics of dustproof, sunproof,
rainproof, etc., and it is fully adapted to the outdoor
2. The equipment warehouse cabinet adopts ventilation and heat
dissipation, and a heat exchanger can be used as the heat
3. The battery cabinet adopts semiconductor cooling method.
4. The cabinet has power and environmental monitoring functions,
which can realize and upload alarms such as power failure, power
failure, access control, temperature, humidity, smoke, water, and
5. The cabinet layout is reasonable, the operation of cable
introduction, fixing and grounding is convenient, and the
maintenance is convenient. Power cables, signal cables, and optical
cables have independent entry holes, which will not interfere with
6. The cables used in the cabinet are made of flame-retardant
7. The cabinet is assembled on site.
1. Good reply: Your inquiry related to our products or price will
be replied within 24 hours.
2. OEM&ODM: We can help you to design or put your logo and
company name into products.
3. Remote Technical support&Full Technical Document
4. Warranty: 1 year warranty( While the warranty is not responsible
for those broken by violence or updated with other brands.)
5. English software, English Indicator
6. Professional, Very competitive price
7. Large Stock, Fast Delivery